Purus: LEAVE NOTHING TO WASTE
The Purus microwell plate cleaner is a new technology designed to bring sustainable practices into the lab, mitigate supply-chain constraints and reduce costs associated with single use plastics.
The Purus removes chemical and biological contaminants from 96 well plates so that they can be reused.
Easy to Implement in Your Lab
- Simply insert your microwell plates of all types in Purus by Grenova
- Select the clean cycle
- Retrieve your sterilized microwell plates without carryover
- Reuse your clean microwell plates in your lab
- Repeat this process, again and again, to reduce waste and save money
|
DESCRIPTION |
Automated, bench tip, microwell plate cleaning system |
|
INPUT |
4 plates per cycle Any plate with SBS footprint Up to 50 mm tall (standard and deep well plates) 96 well format or less |
|
DIMENSIONS |
28.5″ D (725 MM) X 21″ W (535 MM) X 28.5″ H (719 MM) |
|
OPERATING DATA |
Voltage: 115 VAC Frequency: 50-60 Hz Maximum power consumption: 12 Amps Environment temperature range: 15 degrees C – 35 degrees C Environment humidity: Less than or equal to 50% Air pressure (min): Greater than or equal to 100 PSI (0.5MPa) Maximum reagents: 4 UV Wavelength (UVC): 254nm |
|
MINIMUM COMPRESSOR REQUIREMENTS |
Tank size: 15 gal (38 L) Free air displacement at max pressure: Greater than 2.2 CFM @ 90 PSI Tank pressure: 120 PSI Output pressure: Greater than or equal to 75 PSI Additional considerations: In line Filter, Shut off Valve and Regulator, DI water input |
|
COMMUNICATION |
USB: Type A |
|
THROUGHPUT |
Standard wash place: Estimated 12-20 plates per hour Rinse only: Estimated 16-24 plates per hour |
|
VOLTAGE |
110/220V availability |
Click here to view the brochure
